Sport and Outdoor

Sport and Outdoor Wilson
Results 1081 - 1104 of about 1,500
View As:
Sorted by:

K&M Die Base for use with L.E. Wilson Neck Sizing Die

This die base is to be used with L.E Wilson neck sizing dies with an arbor press. This base elevates the die to maximize leverage. the center of the base is machined to allow spent primers to fall through base. Precision machined to be true to allow for the better neck concentricity in the sizing operation. Searches for products like these typically include: Reloading Supplies,Reloading Dies,Reloading Die Parts & Accessories,LE Wilson Die Parts  More Info
$12
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Case Length Headspace Gauge 300 Savage

L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gauge allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within specifications.Technical InformationMaterial: SteelFeatures: Precision MachiningNotes: This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cases for cone-to-head and overall lengthUsed to compare cartridges against the minimum SAAMI chamber dimensionsThe item description will indicate if the headspace gauge is AdjustableInstructions: Drop a fired case into the gauge. Take a measurement on headspace. This can be done with either a depth micrometer or caliper (Depending on if the case is sitting high or low in the gauge). If the case sticks out past maximum headspace the firearm probably has a larger than average chamber. The gauge can still be used because it is being used to determine how much resizing is required.Now once the initial measurement is taken, slowly dial in the full length sizer until there is a 0.001 to 0.002 drop in headspace. This will give the measurement to resize the case just below the chambers headspace in the firearm being reloaded for, giving a more accurate shot and saving brass by not causing it to be overworked.Once the brass has been sized, set the brass in the gauge and set the gauge on a flat surface with the head side facing down. Now look across the top of the gauge, this give the maximum and minimum for trim length. Searches for products like these typically include: Reloading Supplies,Case Gages & Bullet Comparators,Headspace Gages  More Info
$27
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson 338 Edge Case Gage

The L.E. Wilson 338 Edge Case Gage will check overall length to indicate the need for trimming, datum to head length to assure correct headspace and to prevent over sizing. The Cartridge Case Gage was designed with safety in mind and was invented by L.E. Wilson founder Sam (L.E.) Wilson in 1935 after a fellow shooter approached him for help in solving a case-separation issue. The gage allows you to see just how much you are sizing back your shoulder on your cases. This is best done by measuring a case in AS-FIRED condition. Take a measurement. Resize case on current die setting. Then place back in the gage to see just how much you are sizing the shoulder back. Finally, adjust sizing die a Mfg: L.E. Wilson, Inc.  More Info
$27
In stock
Brownells
800-741-0015

Signed Russell Wilson Autographed Framed 16x20 Photo Seattle Seahawks Super Bowl RW Holo Stock #9070...

Check out Russell Wilson Autographed Framed 16x20 Photo Seattle Seahawks Super Bowl RW The item has been personally hand signed by Russell Wilson and comes complete with a Certificate of Authenticity from Seller. This framed 16x20, approximately 24x28 with the frame, that has been personally hand signed by Russell Wilson. It comes with the Russell Wilson hologram & matching certificate of. This 16 x 20 photograph will be protected with an 16 by 20 inch plastic toploader. Our licensed photograph is a great gift idea for any Seattle Seahawks fan or memorabilia collector. Commemorate the great career of Russell Wilson with this glossy 16x20 photo, or check out other souvenirs at SportsCollectibles.com for more products autographed by Russell Wilson. When it comes to NFL Memorabilia, SportsCollectibles.com offers a wide selection of Russell Wilson Autographed Photos. Product will ship in 1-3 business days with free shipping on orders over $200. Buy with confidence as this is an authenticated Russell Wilson autograph.  More Info
$410
In stock
Sports Collectibles
1-800-793-9793

L.E. Wilson Decapping Punch for use with Decapping Base 25 Caliber, 6.5mm, 7mm

Designed for removing the tough crimped-in military primers, the L.E. Wilson Decapping Punch will handle almost any decapping task. Great for depriming cases at the shooting bench. Decapping Base (required) is sold separately.Technical InformationMaterial: Case Hardened SteelFor use with the following calibers: 25-20 WCF25-3525 Remington250 Savage25-06 Springfield256 Winchester Magnum257 Roberts257 Weatherby Magnum264 Winchester Magnum260 Remington6.5x55mm Norma Magnum 6.5mm Remington Magnum270 Winchester7mm TCU7mm IHMSA7mm-08 Remington7x57mm Mauser (7mm Mauser)7mm Remington Magnum7mm Weatherby Magnum7x61mm Sharpe & Hart280 Remington284 WinchesterNotes: Base is for use with Wilson Decapping Punches - sold separately Base and Decapping punch are used to remove primers from military cases. Searches for products like these typically include: Reloading Supplies,Reloading Dies,Reloading Decapping Dies, Pins, Punches & Bases,Reloading Decapping Punches  More Info
$11
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Wilson Stainless Nk Dies - Stainless Neck Die .20 Tactical

These stainless steel neck dies from L.E. Wilson are the most accurate and easiest to use straight line dies on the market. These companion stainless steel neck dies are identical to standard Wilson neck dies except the body and decap pin are stainless. Neck dies accept Wilson, Redding, or our carbide bushing. These dies are beautifully made, accurate and will never rust or corrode. Be sure to order the Sinclair neck die base (APB) for arbor press use. Mfg: L.E. Wilson, Inc.  More Info
$57
In stock
Brownells
800-741-0015

L.E. Wilson Case Length Headspace Gauge 218 Bee

L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gauge allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within specifications.Technical InformationMaterial: SteelFeatures: Precision MachiningNotes: This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cases for cone-to-head and overall lengthUsed to compare cartridges against the minimum SAAMI chamber dimensionsThe item description will indicate if the headspace gauge is AdjustableInstructions: Drop a fired case into the gauge. Take a measurement on headspace. This can be done with either a depth micrometer or caliper (Depending on if the case is sitting high or low in the gauge). If the case sticks out past maximum headspace the firearm probably has a larger than average chamber. The gauge can still be used because it is being used to determine how much resizing is required.Now once the initial measurement is taken, slowly dial in the full length sizer until there is a 0.001 to 0.002 drop in headspace. This will give the measurement to resize the case just below the chambers headspace in the firearm being reloaded for, giving a more accurate shot and saving brass by not causing it to be overworked.Once the brass has been sized, set the brass in the gauge and set the gauge on a flat surface with the head side facing down. Now look across the top of the gauge, this give the maximum and minimum for trim length. Searches for products like these typically include: Reloading Supplies,Case Gages & Bullet Comparators,Headspace Gages  More Info
$27
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Wilson Case Length Gage - Case Length Gage 375 Win

The L.E. Wilson Case Length Gage is a one-piece, non-adjustable cylinder that has milled surfaces. It's designed to check minimum and maximum overall length of rifle and pistol cases that have no shoulder (straight wall). Great for confirming that your cases are within tolerance. Mfg: L.E. Wilson, Inc.  More Info
$18
In stock
Brownells
800-741-0015

Signed Russell Wilson Autographed 8x10 Photo Seattle Seahawks RW Holo Stock #94277

Check out Russell Wilson Autographed 8x10 Photo Seattle Seahawks RW The item has been personally hand signed by Russell Wilson and comes complete with a Certificate of Authenticity from Seller. This 8x10 Photo has been personally hand signed by Russell Wilson. This item has the official tamper-proof Russell Wilson serial numbered hologram and matching certificate of. The 8 x 10 photograph will be protected with an 8 by 10 inch plastic toploader. Our licensed photograph is a great gift idea for any Seattle Seahawks fan or memorabilia collector. Commemorate the great career of Russell Wilson with a glossy 8x10 photo, or check out other souvenirs at SportsCollectibles.com for more products autographed by Russell Wilson. When it comes to NFL Memorabilia, SportsCollectibles.com offers a wide selection of Russell Wilson Autographed Photos. Product will ship in 1-3 business days with free shipping on orders over $200. Buy with confidence as this is an authenticated Russell Wilson autograph.  More Info
$205
In stock
Sports Collectibles
1-800-793-9793

L.E. Wilson Case Length Headspace Gauge 30-30 Winchester

L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gauge allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within specifications.Technical InformationMaterial: SteelFeatures: Precision MachiningNotes: This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cases for cone-to-head and overall lengthUsed to compare cartridges against the minimum SAAMI chamber dimensionsThe item description will indicate if the headspace gauge is AdjustableInstructions: Drop a fired case into the gauge. Take a measurement on headspace. This can be done with either a depth micrometer or caliper (Depending on if the case is sitting high or low in the gauge). If the case sticks out past maximum headspace the firearm probably has a larger than average chamber. The gauge can still be used because it is being used to determine how much resizing is required.Now once the initial measurement is taken, slowly dial in the full length sizer until there is a 0.001 to 0.002 drop in headspace. This will give the measurement to resize the case just below the chambers headspace in the firearm being reloaded for, giving a more accurate shot and saving brass by not causing it to be overworked.Once the brass has been sized, set the brass in the gauge and set the gauge on a flat surface with the head side facing down. Now look across the top of the gauge, this give the maximum and minimum for trim length. Searches for products like these typically include: Reloading Supplies,Case Gages & Bullet Comparators,Headspace Gages  More Info
$27
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Wilson Case Length Gage - Case Length Gage 458 Win

The L.E. Wilson Case Length Gage is a one-piece, non-adjustable cylinder that has milled surfaces. It's designed to check minimum and maximum overall length of rifle and pistol cases that have no shoulder (straight wall). Great for confirming that your cases are within tolerance. Mfg: L.E. Wilson, Inc.  More Info
$18
In stock
Brownells
800-741-0015

L.E. Wilson Trimmer Case Holder 300 Remington Short Action Ultra Magnum (RSAUM) for Fired Cases

The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed for fired cases will work on fired cases only. Technical InformationMaterial: Steel Fits: L.E. Wilson Case Trimmer Use: For fired cases Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth.. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation,Case Trimmers & Prep Centers ,Case Trimmer Case Holders  More Info
$11
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson 22-250 Remington Bushing Full Length Sizing Die

The L.E. Wilson 22-250 Remington Bushing Type Full Length Sizing Die. This die will allow you to size the case neck to your desired neck tension along with sizing down the rest of the case body at the same time. Die includes an adjustable depth decapping rod. Extra Decapping Punch included, does not contain an expander. Made of High Quality Heat Treated Steel. Bushing sold separately. High Quality Material - Hardened to L.E. Wilson Specifications Harder than a Grade 8 Bolt Interchangeable Bushings to get Desired Neck Tension Standard 7/8ths Reloading Press Sizes Shoulder and Body Dimensions Stainless Parts for a Long Lasting Finish Durable and A Mfg: L.E. Wilson, Inc.  More Info
$65
In stock
Brownells
800-741-0015

Signed Russell Wilson Autographed Framed 16x20 Photo Seattle Seahawks RW Holo Stock #90860

Check out Russell Wilson Autographed Framed 16x20 Photo Seattle Seahawks RW The item has been personally hand signed by Russell Wilson and comes complete with a Certificate of Authenticity from Seller. This framed 16x20, approximately 24x28 with the frame, that has been personally hand signed by Russell Wilson. It comes with the Russell Wilson hologram & matching certificate of. This 16 x 20 photograph will be protected with an 16 by 20 inch plastic toploader. Our licensed photograph is a great gift idea for any Seattle Seahawks fan or memorabilia collector. Commemorate the great career of Russell Wilson with this glossy 16x20 photo, or check out other souvenirs at SportsCollectibles.com for more products autographed by Russell Wilson. When it comes to NFL Memorabilia, SportsCollectibles.com offers a wide selection of Russell Wilson Autographed Photos. Product will ship in 1-3 business days with free shipping on orders over $200. Buy with confidence as this is an authenticated Russell Wilson autograph.  More Info
$410
In stock
Sports Collectibles
1-800-793-9793

L.E. Wilson Trimmer Case Holder 240 Weatherby Magnum

The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMaterial: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth.. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation,Case Trimmers & Prep Centers ,Case Trimmer Case Holders  More Info
$11
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Wilson Stainless Nk Dies - Stainless Neck Die 30 Ihmsa

These stainless steel neck dies from L.E. Wilson are the most accurate and easiest to use straight line dies on the market. These companion stainless steel neck dies are identical to standard Wilson neck dies except the body and decap pin are stainless. Neck dies accept Wilson, Redding, or our carbide bushing. These dies are beautifully made, accurate and will never rust or corrode. Be sure to order the Sinclair neck die base (APB) for arbor press use. Mfg: L.E. Wilson, Inc.  More Info
$57
In stock
Brownells
800-741-0015

L.E. Wilson Case Trimmer Neck Reamer 338 Diameter (.3405-.341 Finished Diameter)

One of the great features of the L.E. Wilson Case Trimmer is its versatility. Simply replace the trimmer cutter on the L.E. Wilson Case Trimmer with the L.E. Wilson Inside Neck Reamer to convert to neck reaming operation. Technical Information Material: Steel Diameter: .338 Fits: Wilson Case Trimmer - product number 487924. Notes Neck reamer replaces the trimmer cutter on the Case Trimmer This reamer removes the excess neck material to guarantee clearance between the case and chamber Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation,Case Trimmers & Prep Centers ,Case Trimmer Pilots & Collets  More Info
$29
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson 6.5x55mm Swede Bushing Full Length Sizing Die

The L.E. Wilson 6.5x55mm Swede Bushing Type Full Length Sizing Die. This die will allow you to size the case neck to your desired neck tension along with sizing down the rest of the case body at the same time. Die includes an adjustable depth decapping rod. Extra Decapping Punch included, does not contain an expander. Made of High Quality Heat Treated Steel. Bushing sold separately. High Quality Material - Hardened to L.E. Wilson Specifications Harder than a Grade 8 Bolt Interchangeable Bushings to get Desired Neck Tension Standard 7/8ths Reloading Press Sizes Shoulder and Body Dimensions Stainless Parts for a Long Lasting Finish Durable and Acc Mfg: L.E. Wilson, Inc.  More Info
$65
In stock
Brownells
800-741-0015

Brian Wilson The Beach Boys Autographed 11x14 Photo - PSA/DNA Certified

This Signed Brian Wilson The Beach Boys Autographed 11x14 Photo - PSA/DNA Authentication - Celebrity Signed Pictures. This item comes complete with a Certificate of Authenticity from industry leader, PSA/DNA. This item is the perfect gift idea for a serious Entertainment Memorabilia collector. This item is backed by Sports Collectibles 100% Memorabilia Money Back Guarantee.  More Info
$291
In stock
Sports Collectibles
1-800-793-9793

L.E. Wilson Case Length Headspace Gauge 32 Winchester Special

L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gauge allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within specifications.Technical InformationMaterial: SteelFeatures: Precision MachiningNotes: This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cases for cone-to-head and overall lengthUsed to compare cartridges against the minimum SAAMI chamber dimensionsThe item description will indicate if the headspace gauge is AdjustableInstructions: Drop a fired case into the gauge. Take a measurement on headspace. This can be done with either a depth micrometer or caliper (Depending on if the case is sitting high or low in the gauge). If the case sticks out past maximum headspace the firearm probably has a larger than average chamber. The gauge can still be used because it is being used to determine how much resizing is required.Now once the initial measurement is taken, slowly dial in the full length sizer until there is a 0.001 to 0.002 drop in headspace. This will give the measurement to resize the case just below the chambers headspace in the firearm being reloaded for, giving a more accurate shot and saving brass by not causing it to be overworked.Once the brass has been sized, set the brass in the gauge and set the gauge on a flat surface with the head side facing down. Now look across the top of the gauge, this give the maximum and minimum for trim length. Searches for products like these typically include: Reloading Supplies,Case Gages & Bullet Comparators,Headspace Gages  More Info
$27
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Case Length Gauge 38-55 WCF

L.E. Wilson has been making precision reloading tools for over 80 years. This steel case length gauge allows reloaders to easily identify any case that exceeds the maximum allowable case length according to specifications. Technical InformationMaterial: SteelFeatures: Precision MachiningNotes: Allows reloaders to easily identify cases that are beyond maximum length Searches for products like these typically include: Reloading Supplies,Case Gages & Bullet Comparators,Case Length and Cartridge Overall Length,Rifle  More Info
$17
In stock
MidwayUSA
1-800-243-3220

Signed Russell Wilson Autographed 8x10 Photo Seattle Seahawks RW Holo Stock #94275

Check out Russell Wilson Autographed 8x10 Photo Seattle Seahawks RW The item has been personally hand signed by Russell Wilson and comes complete with a Certificate of Authenticity from Seller. This 8x10 Photo has been personally hand signed by Russell Wilson. This item has the official tamper-proof Russell Wilson serial numbered hologram and matching certificate of. The 8 x 10 photograph will be protected with an 8 by 10 inch plastic toploader. Our licensed photograph is a great gift idea for any Seattle Seahawks fan or memorabilia collector. Commemorate the great career of Russell Wilson with a glossy 8x10 photo, or check out other souvenirs at SportsCollectibles.com for more products autographed by Russell Wilson. When it comes to NFL Memorabilia, SportsCollectibles.com offers a wide selection of Russell Wilson Autographed Photos. Product will ship in 1-3 business days with free shipping on orders over $200. Buy with confidence as this is an authenticated Russell Wilson autograph.  More Info
$205
In stock
Sports Collectibles
1-800-793-9793

L.E. Wilson Trimmer Case Holder 6mm-284 Winchester, 6.5mm-284 Norma (6.5mm-284 Winchester), 284 Wi...

The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMaterial: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth.. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation,Case Trimmers & Prep Centers ,Case Trimmer Case Holders  More Info
$11
In stock
MidwayUSA
1-800-243-3220

L.E. Wilson Trimmer Case Holder 300 AAC Blackout

The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMaterial: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth.. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation,Case Trimmers & Prep Centers ,Case Trimmer Case Holders  More Info
$11
In stock
MidwayUSA
1-800-243-3220
Results 1081 - 1104 of about 1,500


Narrow by:
Price Range
$ $
  • Store
  • Brownells
  • Epic Sports
  • Holabird Sports
  • MidwayUSA
  • Kohl's
  • Sports Collectibles
  • VM Innovations
  • SportsMemorabilia.com
  • Glove Size
  • 12'
  • 10'
  • 11.5'
  • 12.5'
  • 12.75'
  • 11.75'
  • 11'
  • 13'
  • Color
  • Black
  • Yellow
  • Red
  • Gray
  • Pink
  • Orange
  • Blue
  • Brown
  • Gender
  • Unisex
  • Youth
  • Men
  • Women
  • Game Type
  • Baseball
  • Softball
  • Or narrow by:
Popular Searches

loading...
http://catalog.com
http://catalog.com/sport-and-outdoor/Wilson
products
products-96424-Wilson
Sports and Outdoors
grid
_
_
46
View Less
Compare
Add to compare
Remove
A maximum of 4 products can be compared at one time.
Choose at least two products.
Please type the word or words you want to search for in the search box.
true
true