Betaflight 3.1.0 F4 Flight Controller Integrated Frsky Compatible Receiver 20x20mm Built-in 5V BEC-M...
Betaflight 3.1.0 Revo F4 Flight Controller Integrated Compatible Frsky D8 Receiver 20x20mm Built-in 5V BEC Description: Item name: F4 FC Integrated Frsky Receiver Size: 27x27mm Mounting hole: 20x20mm, 2.5mm Weight: 3g Firmware: betaflight_3.1.0_REVO Input voltage: 2-4S Master control: STM32F405RGT6 Sensor: MPU6000 Connector: LED_STRIP Buzzer port: with Blackbox: 128Mb Flash(16M Byte) BEC: Built-in 5V 1A BEC OSD function: no Integrated Frsky D8 protocol receiver, SBUS signal. Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 ESCs. Binding method: (Take the X9D remote control as an example, select the D8 mode.) 1. Press the BIND key on the receiver and power it, the green indicator LED on the receiver will normally on. 2. Set the remote control under BIND mode, the green indicator LED on the receiver goes off manifests binding successfully. Set the remote control beside BIND mode. 3. Power the flight controller again, the green LED is normally on manifests the signal received successfully; the green LED is flashing manifests lost of signal or binding unsuccessfully. Package included: 1 x F4 FC Integrated Frsky Receiver